Safety operation rules for Plastic Extruders

1, equipment regular inspection and maintenance.
2, the transmission part is covered with protection.
3. Check whether the lubricating oil is enough before each shift starts. The equipment and pipeline valves are free of oil, water running, dripping and leakage. The electrical wiring insulation is reliable.
4. Whether the equipment and equipment are installed tightly or not, the installation and disassembly of the equipment should be protected, and no metal sharps should be used to scratch the clean surface. (5) failure of equipment and equipment should be notified to professionals.
6. Gloves should be worn when installing and cleaning equipment so as not to burn hands.
7. When driving, the hands and face must not be directed towards the extrusion die, so as to avoid any personal injury accidents.
8. In the production process, no cutting off material, no parking without reason, no high or low temperature, in order to avoid equipment and personal accidents.
9. If noise is found in the production process and ammeter indication is abnormal, it should be checked and handled in time or waiting for car cleaning.
10, extruders avoid empty cars, so as not to damage the cylinder and screw.
11. The mould head and barrel must be cleaned when stopping. When coke is found in the production process, the mould head and barrel should be stopped and cleaned in time.
12. Place the raw materials, finished products, workstation utensils and production tools in a clean and orderly manner on the production site, keep the worksite sanitary, do a good job of cleaning and disinfecting the surrounding workspace, and comply with the requirements of civilized production and labor safety.